driver & gain block amplifiers - smt 5 5 - 160 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com HMC633LC4 gaas phemt mmic driver amplifier, 5.5 - 17 ghz v00.1107 general description features functional diagram the HMC633LC4 is a gaas phemt mmic driver amplifi er in a leadless 4 x 4 mm ceramic surface mount package which operates between 5.5 and 17 ghz. the amplifi er provides up to 30 db of gain, +30 dbm output ip3, and +23 dbm of output power at 1 db gain compression, while requiring 180 ma from a +5v supply. the HMC633LC4 is an ideal driver amplifi er for microwave radio applications from 5.5 to 17 ghz and may be biased at +5v, 130 ma to provide 2 db lower gain with improved pae. the amplifi ers i/os are dc blocked and matched to 50 ohms with no external matching required. gain: 30 db p1db: +23 dbm saturated power: +23.8 dbm @ 24% pae single supply voltage: +5v @180 ma 50 ohm matched input/output 24 lead ceramic 4x4mm smt package: 16mm 2 electrical specifi cations, t a = +25 c, vdd 1-4 = 5v, idd= 180ma [1] typical applications the HMC633LC4 is ideal for: ? point-to-point radios ? point-to-multi-point radios & vsat ? lo driver for mixers ? military & space parameter min. typ. max. min. typ. max. units frequency range 5.5 - 9 9 - 17 ghz gain 26 30 25 28 db gain variation over temperature 0.030 0.040 0.030 0.040 db/ c input return loss 22 17 db output return loss 22 15 db output power for 1 db compression (p1db) 20 23 18 21 dbm saturated output power (psat) 23.8 22 dbm output third order intercept (ip3) 30 29 dbm noise figure 10 7 db supply current (idd) (idd = idd 1 + idd 2 + idd 3 + idd 4 )180180ma [1] adjust vgg between -2 to 0v to achieve idd= 180 ma typical.
driver & gain block amplifiers - smt 5 5 - 161 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com input return loss vs. temperature output return loss vs. temperature broadband gain & return loss gain vs. temperature p1db vs. temperature psat vs. temperature HMC633LC4 v00.1107 gaas phemt mmic driver amplifier, 5.5 - 17 ghz -40 -30 -20 -10 0 10 20 30 40 2 4 6 8 10 12 14 16 18 20 s11 s21 s22 response (db) frequency (ghz) 0 5 10 15 20 25 30 35 2 4 6 8 10 12 14 16 18 20 +25 c +85 c -55 c gain (db) frequency (ghz) -30 -25 -20 -15 -10 -5 0 2 4 6 8 10 12 14 16 18 20 +25 c +85 c -40 c return loss (db) frequency (ghz) -30 -25 -20 -15 -10 -5 0 2 4 6 8 10 12 14 16 18 20 +25 c +85 c -40 c return loss (db) frequency (ghz) 14 18 22 26 30 4 8 12 16 20 +25 c +85 c -40 c p1db (dbm) frequency (ghz) 15 18 21 24 27 30 4 6 8 10 12 14 16 18 20 +25 c +85 c -40 c psat (dbm) frequency (ghz)
driver & gain block amplifiers - smt 5 5 - 162 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com power compression @ 11 ghz output ip3 vs. temperature noise figure vs. temperature gain & power vs. supply voltage @ 11 ghz reverse isolation vs. temperature power compression @ 17 ghz HMC633LC4 v00.1107 gaas phemt mmic driver amplifier, 5.5 - 17 ghz 0 5 10 15 20 25 30 35 -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 pout (dbm) gain (db) pae (%) pout (dbm), gain (db), pae (%) input power (dbm) 0 5 10 15 20 25 30 35 -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 pout (dbm) gain (db) pae (%) pout (dbm), gain (db), pae (%) input power (dbm) 16 20 24 28 32 36 2 4 6 8 10 12 14 16 18 20 +25 c +85 c -40 c ip3 (dbm) frequency (ghz) -80 -60 -40 -20 0 2 5 8 11 14 17 20 +25 c +85 c -40 c isolation (db) frequency (ghz) 15 20 25 30 35 4.5 4.7 4.9 5.1 5.3 5.5 gain p1db psat gain (db), p1db (dbm), psat (dbm) vdd (v) 0 2 4 6 8 10 12 14 16 4 6 8 1012141618 +25 c +85 c -40 c noise figure (db) frequency (ghz)
driver & gain block amplifiers - smt 5 5 - 163 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com absolute maximum ratings drain bias voltage (vdd1, vdd2, vdd3, vdd4) +5.5 vdc gate bias voltage (vgg) -3 to 0 vdc rf input power (rfin)(vdd = +5 vdc) +5 dbm channel temperature 175 c continuous pdiss (t= 85 c) (derate 11.08 mw/c above 85 c) 0.99 w thermal resistance (channel to package bottom) 90.23 c/w storage temperature -65 to +150 c operating temperature -40 to +85 c vdd (v) idd (ma) 4.5 177 5.0 180 5.5 182 note: amplifi er will operate over full voltage ranges shown above typical supply current vs. vdd gain, power & output ip3 vs. gate voltage @ 11 ghz electrostatic sensitive device observe handling precautions HMC633LC4 v00.1107 gaas phemt mmic driver amplifier, 5.5 - 17 ghz 15 20 25 30 35 90 120 150 180 210 -0.8 -0.78 -0.76 -0.74 -0.72 -0.7 -0.68 gain p1db psat ip3 idd gain (db), p1db (dbm), psat (dbm), ip3 (dbm) idd (ma) vgg (v)
driver & gain block amplifiers - smt 5 5 - 164 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com outline drawing HMC633LC4 v00.1107 gaas phemt mmic driver amplifier, 5.5 - 17 ghz notes: 1. package body material: alumina 2. lead and ground paddle plating: 30-80 microinches gold over 50 microinches minimum nickel. 3. dimensions are in inches [millimeters]. 4. lead spacing tolerance is non-cumulative. 5. package warp shall not exceed 0.05mm datum -c- 6. all ground leads and ground paddle must be soldered to pcb rf ground.
driver & gain block amplifiers - smt 5 5 - 165 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com pin descriptions pin number function description interface schematic 1, 5 - 8, 11 - 14, 18, 21, 23 n/c no connection. these pins may be connected to dc/rf ground. performance will not be affected. 2, 4, 15, 17 gnd package bottom must be connected to rf/dc ground. 3rfin this pin is ac coupled and matched to 50 ohms. 9vgg gate control for amplifi er, please follow mmic amplifi er biasing procedure application note: see application circuit for required external components. 16 rfout this pin is ac coupled and matched to 50 ohms. 24, 22, 20, 19 vdd1, vdd2, vdd3, vdd4 power supply voltage for the amplifi er. see application circuit for required external components. HMC633LC4 v00.1107 gaas phemt mmic driver amplifier, 5.5 - 17 ghz
driver & gain block amplifiers - smt 5 5 - 166 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com HMC633LC4 v00.1107 gaas phemt mmic driver amplifier, 5.5 - 17 ghz component value c1 - c5 100 pf c6 - c10 1000 pf c11 - c15 2.2 f application circuit
driver & gain block amplifiers - smt 5 5 - 167 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com HMC633LC4 v00.1107 gaas phemt mmic driver amplifier, 5.5 - 17 ghz evaluation pcb the circuit board used in the fi nal application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be con- nected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation board should be mounted to an appropriate heat sink. the evaluation circuit board shown is available from hittite upon request. list of materials for evaluation pcb 115857 [1] item description j1 - j2 2.92 mm pc mount k-connector vd1 - vd4 dc pin c1 - c5 100 pf capacitor, 0402 pkg. c6 - c10 1000 pf capacitor, 0603 pkg. c11 - c15 2.2 f capacitor, tantalum u1 HMC633LC4 driver amplifi er pcb [2] 115855 evaluation pcb [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350
|
